热处理-机械粉碎法分离废弃混凝土中骨料与基质胶凝组分

利用热处理与机械粉碎相结合的方法进行了废弃混凝土中骨料与基质胶凝组分的分离试验研究。将废弃混凝土在150℃,250℃,350℃和500℃下进行热处理，然后分别在球磨机和振动磨中粉碎，考察了骨料与基质胶凝组分的分离效率，并分析了骨料与基质的分离机理。试验结果表明。随着热处理温度的提高，分离效率显著提高；热处理温度较低时，球磨粉碎的分离效率高于振动粉碎，但500℃热处理后，振动粉碎的分离效率高于球磨粉碎。     

Reactive blending of thermoplastic polyurethane in situ with poly(vinyl chloride)

In this study, a novel reactive blending process was developed for producing poly(vinyl chloride)/thermoplastic polyurethane (PVC/TPU) blends. An alternative to melt or solution blending, the advantages to such a blending technique are fewer processing steps and less cost, no solvent removal, reduced PVC degradation, and the potential for producing otherwise unobtainable blend morphologies and properties. Using an internal mixer, PVC was compounded and plasticized with the polyol and chain extender of a polyester‐based TPU. Then, upon addition of the stoichiometric amount of TPU diisocyanate, a high molecular weight TPU was polymerized in situ with PVC. Because of reaction‐induced phase separation, the resulting partially miscible PVC/TPU blends were characterized by heterogeneous, multiphase morphologies. In addition, they exhibited excellent tensile properties intermediate between that of neat PVC and TPU. POLYM. ENG. SCI., 45:876–887, 2005. © 2005 Society of Plastics Engineers     

Effects of ion group content and polyol molecular weight on physical properties of HTPB‐based waterborne poly(urethane‐urea)s

A series of waterborne poly(urethane‐urea)s, WPUUs, based on using nonpolar hydroxyl‐terminated polybutadiene (HTPB) as the soft segment, were successfully synthesized in this article. The effects of the COOH group content and soft‐segment molecular weight (Mn_s) on the dispersion, morphology, and physical properties were investigated. Variations of the particle size, viscosity, and zeta potential were first governed by the hydrophilicity of the polymer chain, and then by the swelling derived from water. Fourier transfer infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) indicated that the degree of phase separation decreased as the COOH group content increased or as Mn_s decreased. However, the hydrogen bonding between the soft and hard segments and the two‐phase mixing could not occur in this nonpolar HTPB‐based WPUU system, indicating that the hard segments tended to form smaller domains and to pack more loosely. It was attributed to the fact that the presence of bulky ionic salt groups destroyed the ordered arrangement of the hard segments. In this case, the increases of the interface area between the soft and hard phases resulted in that the present behaviors were similar to the phase mixing. In tensile properties, HTPB‐based WPUUs exhibited higher tensile stress, elongation at break, and modulus as the COOH group content decreased or as Mn_s decreased. In thermal degradation, the introduction of HTPB polyol improved the thermal stability of WPUU. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Stabilization of PCC dispersions prepared directly in the mother-liquid after synthesis through the carbonation of (hydrated) lime

Various CaCO₃-based products are often used in the form of concentrated aqueous dispersions. This study investigates the stabilization of PCC dispersions prepared directly in the mother-liquid after the carbonation of (hydrated) lime through the adsorption of a commercial sodium polyacrylate dispersant. The results demonstrate that the composition of the mother-liquid, particularly the Ca²⁺ activity, profoundly influences virtually all processes pertinent to dispersion stabilization—from the initial charging of the CaCO₃ surface in base PCC dispersions, to the surface charge regulation and dispersion stabilization efficiency of the polyacrylate dispersing agent. Rising prominence of the counterion condensation effects in Ca²⁺ rich solutions limits the conditions conducive to the surface charge regulation through dispersant adsorption to an optimum pH range of about 8-11. Furthermore, dispersion stability analysis, based on the classical DLVO theory of colloid stability, and corroborated by experimental evidence in the form of particle size distribution analyses, also indicates that optimum stability conditions for such PCC dispersions are established with small dispersant doses (0.25-0.5% per dry weight) in the pH range of about 9-11.     

K_2O－CaO－Al_2O_3－SiO_2系统自释釉瓷化学组成的研究

本文从酸度系数着手，证实了Ｋ２Ｏ－ＣａＯ－Ａｌ４Ｏ久－ＳｉＯ２系统中存在自释釉组成，限定了其组成范围，０．６７％＜Ｋ２Ｏ＜１．２８％，１０．６４％＜ＣａＯ＜１３．６２％，１１．５３％＜Ａｌ４Ｏ３＜１５．３２％，７２．７３％＜ＳｉＯ２＜７４．０４％，并讨论了自释釉瓷的性能。     

Immobilization of a cyclodextrin glucanotransferase (CGTase) onto polyethylene film with a carboxylic acid group and production of cyclodextrins from corn starch using CGTase‐immobilized PE film

Carboxylic acid groups were introduced onto polyethylene (PE) film by radiation‐induced graft copolymerization. Subsequently, the clodextrin glucanotransferase (CGTase) was immobilized on the PE film with a carboxylic acid group. The activity of the immobilized CGTase on PE film was in the range of 0.40–1.04 U/cm² per min. The production of cyclodextrins (CDs) from corn starch was examined using the CGTase‐immobilized PE film. The production ratios of CDs using CGTase‐immobilized PE film was in the following order: α–CD > β–CD > γ–CD. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2451–2457, 2002     

一种基于簇的极限学习机的在线学习算法

针对传统的批量学习算法学习速度慢、对空间需求量高的缺点,提出了一种基于簇的极限学习机的在线学习算法。该算法将分簇的理念融入到极限学习机中,并结合极限学习机,提出了一种基于样本类别和样本输出的分簇标准;同时提出了一种加权的Moore-Penrose算法求隐层节点与输出节点的连接权重。实验结果表明,该算法具有学习能力好、拟合度高、泛化性能好等优点。     

新型可见光固化口腔正畸粘合剂研制

介绍了一种新型可见光固化正畸粘合剂的组成、性能及正畸粘接的工艺。此粘合剂由一种单组分液体底胶和单组分糊剂组成。与化学固化粘合剂相比,其操作使用方便,固化时间短。这种新型粘合剂的粘接强度完全满足了正畸粘合剂的要求。     

多尺度空间特征提取的脊柱图像拼接算法

针对脊柱图像视野有限,提出一种基于优化MSFE的脊柱图像自动拼接算法。设计出一种基于尺度因子变化的高斯卷积模板尺寸自适应调整以及双向配对办法;相似性度量采用城市距离;利用RANSAC算法去除错配,从而确定待拼接图像之间的变换参数,最后利用加权平均对图像融合。对实际取得的多幅脊柱图像拼接结果表明该算法具有很好的实时性和鲁棒性。     

TuLP: A Family of Lightweight Message Authentication Codes for Body Sensor Networks简

A wireless sensor network （WSN） commonly whilst a body sensor network （BSN） must be secured with requires lower level security for public information gathering, strong authenticity to protect personal health information. In this paper, some practical problems with the message authentication codes （MACs）, which were proposed in the popular security architectures for WSNs, are reconsidered. The analysis shows that the recommended MACs for WSNs, e.g., CBC- MAC （TinySec）, OCB-MAC （MiniSec）, and XCBC-MAC （SenSee）, might not be exactly suitable for BSNs. Particularly an existential forgery attack is elaborated on XCBC-MAC. Considering the hardware limitations of BSNs, we propose a new family of tunable lightweight MAC based on the PRESENT block cipher. The first scheme, which is named TukP, is a new lightweight MAC with 64-bit output range. The second scheme, which is named TuLP-128, is a 128-bit variant which provides a higher resistance against internal collisions. Compared with the existing schemes, our lightweight MACs are both time and resource efficient on hardware-constrained devices.